D-Link xStack DES-3200 Series - Page 332

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
32
7
DES-3200-28:4#create vlan_translation add cvid 1-10 svid 100
Command: create vlan_translation add cvid 1-10 svid 100
Success.
DES-3200-28:4#
delete vlan_translation cvid
Used to delet
e VLAN translation rules.
Purpose
delete vlan_transl
ation cvid [<vidlist> | all]
Syntax
This
command is used to delete VLAN translation rules.
Description
cvid - Specifies C-VID rules
in VLAN translation.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete all C-VID VLAN translation rules:
DES-3200-28:4#delete vlan_translation cvid all
Command: delete vlan_translation cvid all
Success.
DES-3200-28:4#
show vlan_translation cvid
Used to sh
ow VLAN translation rules.
Purpose
sho
w vlan_translation cvid {<vidlist>}
Syntax
The co
mmand used to show configured VLAN translation
configurations.
Description
cvid - The Q
-in-Q translation rules for the specified C-VID list.
Parameters
Non
e.
Restrictions