xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
33
8
show mld_snooping group
Used to displ
ay the current MLD snooping group configuration on the
Switch.
Purpose
sho
w mld_snooping group {[vlan <vlan_name 32> | vlanid <vidlist>]}
Syntax
This
command is used to display the current MLD snooping group
configuration on the Switch.
Description
Parameters
<vlan_name 32> The name of the VLAN to view MLD snooping
group configuration information.
<vidlist> - The VIDs to view MLD snooping group configuration
information.
If no parameters are specified, the system will display all current MLD
group snooping configurations of the Switch.
Non
e.
Restrictions
Example usage:
To display MLD snooping groups:
DES-3200-28:4#show mld_snooping group
Command: show mld_snooping group
Source/Group : 2000::100:10:10:5/FF0E::100:0:0:20
VLAN Name/VID : default/1
Port Member : 1-2
Mode : INCLUDE
Source/Group : 2000::100:10:10:5/FF0E::100:0:0:20
VLAN Name/VID : default/1
Port Member : 3
Mode : EXCLUDE
Source/Group : NULL/FF0E::100:0:0:21
VLAN Name/VID : default/1
Port Member : 4-5
Mode : EXCLUDE
DES-3200-28:4#
show mld_snooping mrouter_ports
Used to displ
ay the currently configured router ports on the Switch.
Purpose
sho
w mld_snooping mrouter_ports {vlan <vlan_name 32> | vlanid
<vidlist>} {static | dynamic | forbidden}
Syntax
This
command is used to display the currently configured router ports
on the Switch.
Description
Parameters
<vlan_name 32> The name of the VLAN on which the router port
resides to view information for.