D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
33
7
DES-3200-28:4# disable mld_snooping
Command: disable mld_snooping
Success.
DES-3200-28:4#
show mld_snooping
Used to displ
ay the current configuration of MLD snooping on the
Switch.
Purpose
sho
w mld_snooping {vlan <vlan_name 32> | vlanid <vidlist>}
Syntax
This
command is used to display the current MLD snooping
configuration on the Switch.
Description
Parameters
<vlan_name 32>  The name of the VLAN for which you want to view
the MLD snooping configuration.
<vidlist> - A list of VIDs.
If no parameter specified, the system will display all current MLD
snooping configuration.
Non
e.
Restrictions
Example usage:
To display MLD snooping:
DES-3200-28:4# show mld_snooping
Command: show mld_snooping
MLD Snooping Global State : Enabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Listener Query Interval : 1
Querier Router Behavior : Non-Querier
State : Disabled
Fast Done : Disabled
Receive Query Count : 0
Version : 2
Total Entries: 1
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)