D-Link xStack DES-3200 Series - Page 341

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
33
6
config mld_snooping mrouter_ports_forbidden
<vlan_
name 32> - The name of the VLAN on which the forbidden
router port resides.
Parameters
[add | delete] - Specifies to add or delete the forbidden router ports.
<portlist> - Specifies a range of ports to be configured.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To set up port range 1 to 10 to be forbidden router ports:
DES-3200-28:4#config mld_snooping mrouter_ports_forbidden default add 1-10
Command: config mld_snooping mrouter_ports_forbidden default add 1-10
Success.
DES-3200-28:4#
enable mld_snooping
Used to ena
ble MLD snooping on the Switch.
Purpose
enabl
e mld_snooping
Syntax
This
command is used to enable MLD snooping on the Switch.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable MLD snooping on the Switch:
DES-3200-28:4# enable mld_snooping
Command: enable mld_snooping
Success.
DES-3200-28:4#
disable mld_snooping
Used to disab
le MLD snooping on the Switch.
Purpose
disa
ble mld_snooping
Syntax
This
command is used to disable MLD snooping on the Switch.
Disabling MLD snooping allows all MLD and IPv6 multicast traffic to
flood within a Switch by default.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable MLD snooping on the Switch: