D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
35
1
DES-3200-28:4#config limited_multicast_addr ports 1,3 add profile_id 2
Command: config limited_multicast_addr ports 1,3 add profile_id 2
Success.
DES-3200-28:4#
show limited_multicast_addr
Used to sh
ow the per-port Limited IP multicast address range.
Purpose
sho
w limited_multicast_addr ports {<portlist>}
Syntax
This
command is used to display the multicast filter profiles bound to
ports.
Description
<po
rtlist> - A port or range of ports on which the limited multicast
address range to be shown has been assigned. If no portlists are
specified, the system will display all ports on which the limited
multicast address range is to be shown.
Parameters
Non
e.
Restrictions
Example usage:
To show the limited multicast address on ports 1 and 3:
DES-3200-28:4#show limited_multicast_addr ports 1,3
Command: show limited_multicast_addr ports 1,3
Port : 1
Access: permit
Profile ID Name Multicast Addresses
---------- -------------------------------- ----------------------
Port : 3
Access: permit
Profile ID Name Multicast Addresses
---------- -------------------------------- ----------------------
DES-3200-28:4#
config max_mcast_group
Used to co
nfigure the maximum number of multicast groups a port
can join.
Purpose