D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
32
show greeting_message
Used to view
the currently configured greeting message
configured on the Switch.
Purpose
sho
w greeting_message
Syntax
This
command is used to view the currently configured greeting
message on the Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To view the currently configured greeting message:
DES-3200-28:4#show greeting_message
Command: show greeting_message
=========================================================================
DES-3200-28 Fast Ethernet Switch
Command Line Interface
Firmware: Build 1.20.B.008
Copyright(C) 2008 D-Link Corporation. All rights reserved.
=========================================================================
DES-3200-28:4#