D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
36
6
DES-3200-28:4# config lldp forward_ message enable
Command: config lldp forward_ message enable
Success.
DES-3200-28:4#
show lldp
This
command displays the Switch’s general LLDP configuration status.
Purpose
sho
w lldp
Syntax
This
command is used to display the Switch’s general LLDP
configuration status.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage
To display the LLDP system level configuration status:
DES-3200-28:4# show lldp
Command: show lldp
LLDP system information
Chassis Id Subtype : MAC Address
Chassis Id : 00-15-E9-41-5A-A7
System Name : D-Link
System Description : Fast Ethernet Switch
System Capabilities : Repeater, Bridge,
LLDP Configurations
LLDP Status : Disable
LLDP Forward Status : Disable
Message Tx Interval : 30
Message Tx Hold Muliplier : 4
ReInit delay : 2
Tx Delay : 2
Notification Interval : 5
DES-3200-28:4#
show lldp mgt_addr
Used to displ
ay the LLDP management address information.
Purpose
sho
w lldp mgt_addr {ipv4 <ipaddr>}
Syntax
This
command is used to display LLDP management address
information.
Description
ipv4 - IP address of IPV4.
Parameters
Non
e.
Restrictions
Example usage