D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
39
4
enable address_binding arp_inspection
Used to ena
ble ARP inspection.
Purpose
enabl
e address_binding arp_inspection
Syntax
This
command is used to filter ARP packets which have unauthorized
sender MAC, IP address, and ingress port. ARP inspection is only active
on IP-MAC-Port Binding enabled ports.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To enable ARP inspection:
DES-3200-28:4#enable address_binding arp_inspection
Command: enable address_binding arp_inspection
Success.
DES-3200-28:4#
disable address_binding arp_inspection
Used to disab
le ARP inspection.
Purpose
disa
ble address_binding arp_inspection
Syntax
This
command is used to disable ARP inspection.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To disable ARP inspection:
DES-3200-28:4#disable address_binding arp_inspection
Command: disable address_binding arp_inspection
Success.
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)