D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
39
9
show loopdetect
Used to displ
ay the Switch’s current loopback detection configuration.
Purpose
sho
w loopdetect
Syntax
This
command is used to display the Switch’s current loopback detection configuration.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display the current loopback detection configuration on the Switch:
DES-3200-28F:4#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
LBD Status : Disabled
LBD Mode : Port Based
LBD Interval : 10
LBD Recover Time : 60
LBD Trap Status : None
DES-3200-28F:4#