D-Link xStack DES-3200 Series - Page 421

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
41
6
enable mac_based_access_control
Used to ena
ble MAC-based access control.
Purpose
Syntax enable mac_based_access_control
This
command enables MAC-based access control on the Switch. By default this is not
enabled.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable the MAC-based access control globally on the Switch:
DES-3200-28F:4# enable mac_based_access_control
Command: enable mac_based_access_control
Success.
DES-3200-28F:4#
disable mac_based_access_control
Used to disab
le MAC-based access control.
Purpose
disa
ble mac_based_access_control
Syntax
This will di
sable MAC-based access control on the Switch.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To disable the MAC-based access control globally on the Switch:
DES-3200-28F:4# disable mac_based_access_control
Command: disable mac_based_access_control
Success.
DES-3200-28F:4#