D-Link xStack DES-3200 Series - Page 422

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
41
7
config mac_based_access_control password
Used to co
nfigure the password of the MAC-based access control.
Purpose
config ma
c_based_access_control password <passwd 16>
Syntax
This
command will set the password that will be used for authentication
via RADIUS server.
Description
<pa
ssword 16> - In RADIUS mode, the Switch communicates with the
RADIUS server using this password. The maximum length of the key is
16.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To configure the password for MAC-based access control:
DES-3200-28:4#config mac_based_access_control password switch
Command: config mac_based_access_control password switch
Success.
DES-3200-28:4#
config mac_based_access_control method
Used to co
nfigure the MAC-based access control authenticating
method.
Purpose
config ma
c_based_access_control method [local | radius]
Syntax
This
command specifies to authenticate via local database or via
RADIUS server.
Description
local – Spe
cify to authenticate via local database.
Parameters
radius – Specify to authenticate via RADIUS server.
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To configure the MAC-based access control method:
DES-3200-28:4#config mac_based_access_control method local
Command: config mac_based_access_control method local
Success.
DES-3200-28:4#