D-Link xStack DES-3200 Series - Page 435

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
43
0
config mac_based_access_control log state
Used to ena
ble or disable generating of MAC-based access control logs.
Purpose
config ma
c_based_access_control log state [enable | disable]
Syntax
Whe
n MAC-based access control log state is enabled, The log of MAC-based access control
will be generated.
Description
If the MAC-based access control log state is disabled, no log will be generated.
enabl
e - Enable log for MAC-based access control. The log of MAC-based access control
will be generated.
Parameters
disable - Disable log for MAC-based access control.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable log state of MAC-based Access Control:
DES-3200-28F:4# config mac_based_access_control log state disable
Command: config mac_based_access_control log state disable
Success.
DES-3200-28F:4#