D-Link xStack DES-3200 Series - Page 458

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
45
3
enable cfm
This
command is used to enable the CFM globally.
Purpose
enabl
e cfm
Syntax
This
command is used to enable the CFM globally.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To globally enable CFM on the Switch:
DES-3200-28F:4# enable cfm
Command: enable cfm
Success.
DES-3200-28F:4#
disable cfm
This
command is used to disable the CFM globally.
Purpose
disa
ble cfm
Syntax
This
command is used to disable the CFM globally.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To disable CFM on the Switch:
DES-3200-28F:4# disable cfm
Command: disable cfm
Success.
DES-3200-28F:4#