D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
41
show port_security
Used to displ
ay the current port security configuration.
Purpose
sho
w port_security {ports <auth_portlist>}
Syntax
This
command is used to display port security information of the
Switch’s ports. The information displayed includes port security,
admin state, maximum number of learning address and lock mode.
Description
Parameters
<auth_portlist>  Specifies a port or range of ports to be viewed.
Non
e.
Restrictions
Example usage:
To display the port security configuration:
DES-3200-28:4#show port_security ports 1-10
Command: show port_security ports 1-10
Port_security Trap/Log : Disabled
Port Admin State Max. Learning Addr. Lock Address Mode
---- ----------- ------------------ -----------------
1 Disabled 1 DeleteOnTimeout
2 Disabled 1 DeleteOnTimeout
3 Disabled 1 DeleteOnTimeout
4 Disabled 1 DeleteOnTimeout
5 Disabled 1 DeleteOnTimeout
6 Disabled 1 DeleteOnTimeout
7 Disabled 1 DeleteOnTimeout
8 Disabled 1 DeleteOnTimeout
9 Disabled 1 DeleteOnTimeout
10 Disabled 1 DeleteOnTimeout
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)