D-Link xStack DES-3200 Series - Page 47

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
42
enable port_security trap_log
Used to ena
ble the trap log for port security.
Purpose
enabl
e port_security trap_log
Syntax
This
command, along with the disable port_security trap_log, will
enable the sending of log messages to the Switch’s log and SNMP
agent when the port security of the Switch has been triggered.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable the port security trap log setting:
DES-3200-28:4#enable port_security trap_log
Command: enable port_security trap_log
Success.
DES-3200-28:4#
disable port_security trap_log
Used to disab
le the trap log for port security.
Purpose
disa
ble port_security trap_log
Syntax
This
command, along with the enable port_security trap_log, will
disable the sending of log messages to the Switch’s log and SNMP
agent when the port security of the Switch has been triggered.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable the port security trap log setting:
DES-3200-28:4#disable port_security trap_log
Command: disable port_security trap_log
Success.
DES-3200-28:4#