D-Link xStack DES-3200 Series - Page 460

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
45
5
Example usage
To view CFM settings for ports 3-6:
DES-3200-28F:4# show cfm ports 3-6
Command: show cfm ports 3-6
Port State
----- ---------
3 Enabled
4 Enabled
5 Enabled
6 Disabled
DES-3200-28F:4#
show cfm
This
command is used to show the CFM configuration.
Purpose
sho
w cfm { [ md <string 22> { ma <string 22> { mepid <int 1-8191> } } | mepname <string
32> ] }
Syntax
This
command is used to show the CFM configuration.
Description
md <string 2
2> The name of the maintenance domain (MD) to view CFM settings.
Parameters
ma <string 22> The name of the maintenance association (MA) to view CFM settings.
mepid <1-8191> - MEP identifier for CFM settings displayed for MEP.
mep <string 32> - MEP name for CFM settings displayed for MEP.
Non
e.
Restrictions
Example usage:
To view CFM settings:
DES-3200-28F:4# show cfm
Command: show cfm
CFM State: enabled
Level MD Name
----- ----------------------
2 op_domain
DES-3200-28F:4#