D-Link xStack DES-3200 Series - Page 468

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
46
3
delete cfm linktrace
This
command is used to delete received link trace responses.
Purpose
delete cfm lin
ktrace { [ md <string 22> { ma <string 22> { mepid <int 1-8191> } } | mepname
<string 32> ] }
Syntax
This
command is used to delete the stored link trace response data that have been initiated by
the specified MEP.
Description
md <string 2
2> - The name of the maintenance domain (MD) where the trace responses are
deleted.
Parameters
ma <string 22> - The name of the maintenance association (MA) where the trace responses are
deleted.
mepname <string 32> - The MEP name of the MEP where the trace responses are deleted.
mepid <int 1-8191> - The MEP identifier of the MEP where the trace responses are deleted.
Non
e.
Restrictions
Example usage:
To remove link trace responses from MEP “mep1”:
DES-3200-28F:4# delete cfm linktrace mepname mep1
Command: delete cfm linktrace mepname mep1
Success.
DES-3200-28F:4#