xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
46
4
show cfm mipccm
This
command is used to display the MIP CCM database entries.
Purpose
sho
w cfm mipccm
Syntax
All entries in t
he MIP CCM database will be shown. A MIP CCM entry is similar to a FDB which
keeps the forwarding port information of a MAC entry.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage
To view the MIP CFM data base:
DES-3200-28F:4# show cfm mipccm
Command: show cfm mipccm
MA VID MAC Address Port
---------- ---- ----------------- -----
opma 1 00-00-b8-05-00-00 2
opma 1 00-00-01-03-00-04 3
Total: 2
DES-3200-28F:4#
config cfm mp_ltr_all
This
command is used to enable or disable the "all MPs reply LTRs" function.
Purpose
config
cfm mp_ltr_all [ enable | disable ]
Syntax
This function
is only for test purposes. According to IEEE 802.1ag, a Bridge replies with one
LTR to an LTM.
Description
This command can make all MPs on the LTM’s forwarding path reply with LTRs, no matter
whether or not they are on a bridge.
enabl
e - Enables the feature.
Parameters
disable - Disables this feature.
Only Administrator-level users
can issue this command.
Restrictions