D-Link xStack DES-3200 Series - Page 489

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
48
4
clear ethernet_oam ports (statistics)
Used to cle
ar Ethernet OAM port statistics.
Purpose
clea
r ethernet_oam ports [ <portlist> | all ] statistics
Syntax
Use this com
mand to clear Ethernet OAM ports statistics information.
Description
<po
rtlist> - Specifies a range of ports to clear OAM statistics. Use all to specify all ports.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To clear port 1 OAM statistics:
DES-3200-28F:4# clear ethernet_oam ports 1 statistics
Commands: clear ethernet_oam ports 1 statistics
Success
DES-3200-28F:4#
clear ethernet_oam ports (event log)
Used to cle
ar Ethernet OAM event log for ports.
Purpose
clea
r ethernet_oam ports {<portlist> | all } event_log
Syntax
Use this com
mand to clear ports Ethernet OAM event log information.
Description
<po
rtlist> - Specifies a range of ports to clear the OAM event log. Use all to specify all ports.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To clear port 1 OAM event log:
DES-3200-28F:4# clear ethernet_oam ports 1 event_log
Commands: clear ethernet_oam ports 1 event_log
Success
DES-3200-28F:4#