xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
48
3
show ethernet_oam ports (event log)
Used to displ
ay Ethernet OAM event log
Purpose
sho
w ethernet_oam { <portlist>} event_log { index <value_list>}
Syntax
Use this com
mand to view ports Ethernet OAM event log information. The Switch can buffer
1000 event logs. The event log is different from sys-log. It provides more detailed information
than sys-log. Each OAM event will be recorded in both OAM event log and syslog. Specify an
index to show a range of events.
Description
<po
rtlist> - Specifies a range of ports to display event logs. Use all to specify all ports.
Parameters
index - Specifies an index range to display.
Non
e.
Restrictions
Example usage:
To show port 1 OAM event:
DES-3200-28F:4# show ethernet_oam ports 1 event_log
Commands: show ethernet_oam ports 1 event_log
Port 1
--------------------------------------
Event Listing
Index Type Location Time Stamp
----- ---------------- ------------- ----------------------------------
1 Error Symbol Local 2008-4-18 10:30
Value: 3, window: 30000ms, threshold: 3, Accumulated errors: 10
2 Error Frame Seconds Remote 2008-4-18 10:35
Value: 5,window: 1000, threshold: 3, Accumulated errors: 10
3 Dying Gasp Remote 2008-4-18 10:35
Local Event Statistics
Error Symbol Event : 1
Error Frame Event : 1
Error Frame Period Event : 0
Errored Frame Seconds Event : 0
Dying Gasp : 0
Critical Event : 0
Remote Event Statistics
Error Symbol Event : 1
Error Frame Event : 1
Error Frame Period Event : 0
Errored Frame Seconds Event : 0
Dying Gasp : 1
Critical Event : 0
DES-3200-28F:4#
To Next Page
Loading...
Need help?
General
