xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
49
0
disable bpdu_protection
Used to disab
le BPDU attack protection on the Switch.
Purpose
disa
ble bpdu_protection
Syntax
Use this to di
sable BPDU attack protection on the entire Switch. Note that if BPDU attack
protection is disabled globally, it will also be disabled for ports regardless of the config
bpdu_protection ports settings.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable BPDU attack protection on the entire Switch:
DES-3200-28F:4# disable bpdu_protection
Commands: disable bpdu_protection
Success.
DES-3200-28F:4#
show bpdu_protection
Used to displ
ay BPDU attack protection settings on the Switch.
Purpose
s
how bpdu_protection {ports {<portlist> }}
Syntax
Use this to view the glo
bal or per port BPDU attack protection configuration.
Description
ports – Sp
ecify to view the BPDU attack protection port configuration.
Parameters
<portlist>- Specify the ports to display. If none is specified, all ports BPDU attack
protection configuration will be listed.
Non
e.
Restrictions
Example usage:
To display global settings for BPDU protection:
DES-3200-28F:4# show bpdu_protection
Commands: show bpdu_protection
BPDU Protection Global Settings
---------------------------------------
BPDU Protection Status : Enabled
BPDU Protection Recovery Time : 60 seconds
BPDU Protection Trap State : None
BPDU Protection Log State : None
DES-3200-28F:4#
To Next Page
Loading...
Need help?
General
