D-Link xStack DES-3200 Series - Page 494

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
48
9
enable bpdu_protection
Used to glob
ally enable BPDU attack protection on the Switch.
Purpose
enabl
e bpdu_protection
Syntax
Use this
to enable BPDU attack protection.
Description
NOTE: The BPDU Attack Protection function and Spanning Tree Protocol
for ports are mutually exclusive. When the STP function is enabled on a
particular port, BPDU Attack Protection cannot be enabled.
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To enable BPDU attack protection on the entire Switch:
DES-3200-28F:4# enable bpdu_protection
Commands: enable bpdu_protection
Success.
DES-3200-28F:4#