D-Link xStack DES-3200 Series - Page 51

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
46
Exam
ple usage:
To create an SNMP user on the Switch:
DES-3200-28:4#create snmp user dlink default encrypted by
_
password auth md5
knickerbockers priv none
Command: create snmp user dlink default encrypted by
_
password auth md5
knickerbockers priv none
Success.
DES-3200-28:4#
delete snmp user
Used to rem
ove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
Purpose
delete snmp
user <SNMP_name 32>
Syntax
This
command is used to remove an SNMP user from its SNMP
group and then delete the associated SNMP group.
Description
Parameters
<SNMP_name 32>  An alphanumeric string of up to 32 characters
that identifies the SNMP user that will be deleted.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete a previously entered SNMP user on the Switch:
DES-3200-28:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3200-28:4#