xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
51
Exam
ple usage:
To create the SNMP community string “dlink”:
DES-3200-28:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DES-3200-28:4#
delete snmp community
Used to rem
ove a specific SNMP community string from the Switch.
Purpose
delete snmp
community <community_string 32>
Syntax
This
command is used to remove a previously defined SNMP
community string from the Switch.
Description
Parameters
<community_string 32> An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete the SNMP community string “dlink”:
DES-3200-28:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-3200-28:4#
show snmp community
Used to displ
ay SNMP community strings configured on the Switch.
Purpose
sho
w snmp community {<community_string 32>}
Syntax
This
command is used to display SNMP community strings that are
configured on the Switch.
Description
Parameters
<community_string 32> An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Non
e.
Restrictions
To Next Page
Loading...
Need help?
General
