D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
53
show snmp engineID
Used to displ
ay the identification of the SNMP engine on the Switch.
Purpose
sho
w snmp engineID
Syntax
This
command is used to display the identification of the SNMP
engine on the Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display the current name of the SNMP engine on the Switch:
DES-3200-28:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DES-3200-28:4#