D-Link xStack DES-3200 Series - Page 81

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
76
DES-3200-28 Fast Ethernet Switch
Command Line Interface
Firmware: Build 1.10.B014
Copyright(C) 2009 D-Link Corporation. All rights reserved.
DES-3200-28:4#
DES-3200-28:4#
DES-3200-28:4#download cfg_fromTFTP 10.41.44.44 c:\cfg\setting.txt
Command: download cfg_fromTFTP 10.41.44.44 c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration................. Done.
The very end of the autoconfig process appears like this:
Success.
DES-3200-28:4#
DES-3200-28:4## ROUTE
DES-3200-28:4#
DES-3200-28:4#
DES-3200-28:4##---------------------------------------------------
DES-3200-28:4## End of configuration file for DES-3200-28
DES-3200-28:4##---------------------------------------------------
DES-3200-28:4#
DES-3200-28:4#
Note: W
ith autoconfig enabled, the Switch ipif settings now define the Switch as a DHCP
client. Use the show switch command to display the new IP settings status.