xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
84
show error ports
Used to displ
ay the error statistics for a range of ports.
Purpose
sho
w error ports <portlist>
Syntax
This
command is used to display all of the packet error statistics
collected and logged by the Switch for a given port list.
Description
Parameters
<portlist> Specifies a port or range of ports to be displayed.
Non
e.
Restrictions
Example usage:
To display the errors of the port 3:
DES-3200-28:4#show error ports 3
Command: show error ports 3
Port Number : 3
RX Frames TX Frames
--------- ---------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Drop Pkts 0 Collision 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
To Next Page
Loading...
