D-Link xStack DES-3200 Series - Page 92

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
87
clear counters
Used to c
lear the Switch’s statistics counters.
Purpose
clea
r counters {ports <portlist>}
Syntax
This
command is used to clear the counters used by the Switch to
compile statistics.
Description
Parameters
<portlist>  Specifies a port or range of ports to be displayed.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To clear the counters:
DES-3200-28:4#clear counters ports 2-9
Command: clear counters ports 2-9
Success.
DES-3200-28:4#
clear log
Used to cle
ar the Switch’s history log.
Purpose
clea
r log
Syntax
This
command is used to clear the Switch’s history log.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To clear the log information:
DES-3200-28:4#clear log
Command: clear log
Success.
DES-3200-28:4#