DACE RT25/50 - Page 47

47
Main PC Board See Controller
Manual Override Allows the gate to be moved manually.
Mul User Mode Used in a Townhouse applicaon. The controller will not accept a trigger while opening
to prevent the accidental closing of the gate on a vehicle/person.
Operator Gate motor.
Overcurrent See Collision Sensing
Party Mode Allows the gate to remain open when the Auto Close funcon is acve.
Pedestrian Entry The paral opening of the gate prevenng vehicle access.
Pinion Gear The gear on the operator that meshes with the rack on the gate making the gate move.
Posive Close The closing of the gate with no gap between the gate and the end stop.
Rack A length of gear aached to the gate which is driven by the pinion gear.
Rail The steel bar, xed to the ground, along which the gate runs.
Receiver Receives a signal from a Remote (transmier) and triggers the operator.
Remote A hand held device which transmits a signal to trigger the operator.
Safety Beams Also know as Infrared Beams or Passive Infrared Beams. These are safety devices that
are mounted across the driveway and used to sense an obstrucon to prevent the gate
closing on the object resulng in damage or injury.
Test Buon Pressing the Joysck on the controller will trigger the operator.
The Deterrent
Bracket
Deters the the of and tampering with the operator.
Transformer Reduces the power supply (220V AC/240V AC) to 16V AC or 24V AC to charge the
baery.
Transmier See remote
……..connued