5-139 MISCELLANEOUS CONTROLS AND OPTIONS
NEUTRAL
(4) Place the control lever in the "NEUTRAL" posi-
tion immediately after raising the deck to unload
the materials.
UP
NEUTRAL
MTF0630
3) When attempting to stop the deck halfway
(1) When attempting to stop the deck for a short
interval in the middle of ascending or descend-
ing, place the control lever in the "NEUTRAL"
position. (The control lever and deck operate,
irrespectively of gear pump rotation.)
P.T.O. lever
MTF0640
(2) When attempting to stop the deck for a long in-
terval in the middle of ascending or desending,
switch off the PTO and place the control lever in
the "NEUTRAL" position.
NEUTRAL
DOWN
MTF0650
4) When attempting to lower the deck
(1) Place the dump control lever in the "DOWN"
position.
Note
1. If the dump control lever is placed in the "DOWN"
position, the PTO lever also comes down.
2. The deck descents by its own weight.
https://www.truck-manuals.net/