1-2 HOW TO HANDLE THE VEHICLE
DDC (4) During the first 4,000 km, limit engine speed to
70 percent of the maximum allowance, and
frequently watch tachometer to prevent engine
over-running while driving your vehicle.
Maximum allowable engine speed (rpm)
Engine First 4,000 km After 4,000 km
DE12TI 1,470 2,100
DE12TIS 1,470 2,100
DV15T 1,600 2,300
MTA0090
MTA0091 DV15TI 1,470 2,100
DV15TIS 1,470 2,100
DDC 1,260 1,800
3) Through check should be performed ac-
cording to "CONTROLS AND INSTRU-
MENTS" and "BEFORE DRIVING OFF".
MTA0050
4) In order to operate your vehicle safely and
dependably, it is imperative to perform ne-
cessary inspection and adjustment as out-
lined in "INSPECTION AND MAINTE-
NANCE".
MEA0021
MTA0071
5) Overloading may not only shorten the ser-
vice life of your vehicle but also cause seri-
ous problems against your safety. The weight
of the payload must be within the GVW rat-
ing and distributed over the front and rear
axles so as not to exceed their axle capaci-
ties. Refer to "SPECIFICATIONS AND SER-
VICE DATA" for GVW and Axle capacity.
https://www.truck-manuals.net/
To Next Page
Loading...
