3-75 INSPECTION AND MAINTENANCE
3. Thoroughly clean the inside of air cleaner
housing and outer cover to remove dust
particles before refitting the element.
4. Attach the element horizontally, tighten the
element retaining wing nuts, refit the outer
cover, and then tighten the wing nuts to
retain the air cleaner securely.
Caution
rear cover
rear cover hole
packing
element
a way out
MTC0160
MTS5160
It is strongly advisable to use genuine Daewoo
air cleaner element.
Caution
Be sure to match element to rear cover inside
keeping horizontality to prevent the dirt from
inflowing. If not, it may cause engine burn.
(3) Replacement
Replacement intervals for air cleaner depend on
the conditions of working area(dust, earth, or
sand) and contamination or deformation of the
element. Replace in a timely manner.
Be sure to replace it every 48,000km driving.
(4) Other cautions
1. When refitting the element after cleaning or
replacing it, hold it horizontally and be sure
MTC0170
to fit wing nuts to retain the air cleaner hous-
ing and element securely.
When replacing the inner element, do not
forget to tighten the inner element with the
wing nut.
2. When washing off the vehicle with the cab
tilted, be careful to prevent the entry of water
into the air cleaner housing. Otherwise, the
air cleaner will get wet and not perform its
functions. If water comes into the engine,
critical trouble will result.
3. Inner element is available for dump truck
only.
https://www.truck-manuals.net/
To Next Page
Loading...
