Daher TBM 930 - Stall no Heat

Pilot's Operating Handbook
Section 3
Emergency procedures
EASA Approved
Edition 1 - January 15, 2018
Rev. 3
Page 3.11.7
STALL NO HEAT
Indicates that :
- stall warning vane heating has failed or
- PITOT R & STALL HTR switch is not ON while the engine is running.
Correct operation of the aural stall warning may be altered by severe or prolonged
icing.
1 - Airspeed Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintain minimum airspeed according
to airplane configuration and icing conditions
► Fly the airplane ◄
End
of procedure.
PIM - DO NOT USE FOR FLIGHT OPERATIONS