Daher TBM 930 - Xpdr1 Fail Xpdr2 Fail

Pilot's Operating Handbook
Section 3
Emergency procedures
EASA Approved
Edition 1 - January 15, 2018
Rev. 2
Page 3.12.32
or
XPDR1 FAIL XPDR2 FAIL
Indicates transponder 1 [or transponder 2] is inoperative.
► Fly the airplane ◄
If transponder 2 [or transponder 1] is available :
1 - Set transponder 2 [or transponder 1] as active.
2 - Continue flight.
3 - Inform maintenance department.
If transponder 2 [or transponder 1] is unavailable :
4 - Inform Air Traffic Control of the loss of the second transponder.
5 - Leave controlled airspace.
6 - Continue flight.
7 - Inform maintenance department.
End of procedure.
PIM - DO NOT USE FOR FLIGHT OPERATIONS