Daher TBM 930 - Xpdr1 Ads-B Fail Xpdr2 Ads-B Fail

Pilot's Operating Handbook
Section 3
Emergency procedures
EASA Approved
Edition 1 - January 15, 2018
Rev. 2
Page 3.12.33
XPDR1 ADS-B FAIL XPDR2 ADS-B FAIL
or
Indicates ADS-B OUT function of transponder 1 [or transponder 2] is inoperative.
Other functions may remain available.
► Fly the airplane ◄
If transponder 2 [or transponder 1] is available :
1 - RestoreADS-BOUT functionbysettingtransponder2 [or transponder 1]
as active.
2 - Continue flight.
3 - Inform maintenance department
If transponder 2 [or transponder 1] is unavailable :
4 - Inform Air Traffic Control.
5 - Leave ADS-B OUT airspace.
6 - Continue flight.
7 - Inform maintenance department.
End of procedure.
PIM - DO NOT USE FOR FLIGHT OPERATIONS