EasyManua.ls Logo

Daher TBM 930 - Landing Distances

Daher TBM 930
877 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pilot's Operating Handbook
Section 5
Performance
EASA Approved
Edition 1 - January 15, 2018
Rev. 0
Page 5.14.1
5.14 - Landing distances
The following tables give the landing distances for several weight configurations.
All common information applicable to tables (pages 5.14.2 to 5.14.4) are listed below.
Associated conditions
:
- Landing gear DN and flaps LDG
- Maximum breaking without reverse
- Hard, dry and level runway
In table headings :
- GR = Ground roll (in ft)
- D
50
= Landing distance (clear to 50 ft) (in ft)
Corrections :
- In case of wind, apply the following corrections :
- Reduce total distances by 10 % every 10 kts of headwind
- Increase total distances by 30 % every 10 kts of tail wind
- Other runway surfaces :
Landing distances given in the tables are for landing on hard, dry and level
runway. Other runway surfaces require the following correction factors.
Increase distances by :
7 % on hard grass
10 % on short grass
15 % on wet runway
25 % on high grass
30 % on slippery runway
PIM - DO NOT USE FOR FLIGHT OPERATIONS

Table of Contents

Related product manuals