Pilot's Operating Handbook
Section 7
Description
Edition 1 - January 15, 2018
Rev. 5
Page 7.11.2
Dynamic pressure systems
Dynamic pressure is provided by two heated pitot probes, one installed under each
wing.
The left probe supplies ADC 1 and the standby instrument.
The right probe supplies ADC 2.
Each line has a drain plug located in the root of the wing.
Pitot heating
Pitot heating is controlled by PITOT L HTR and PITOT R & STALL HTR switches
located on DE-ICE SYSTEM panel. Refer to chapter 7.13 for further details.
▲ CAUTION ▲
On the ground, do not turn on pitot heat for long periods to avoid probe
overheating.
▲
To Next Page
Loading...
