Dahua L Series

User's Manual
133
Figure 4-30 Record type
●
When the record type is Motion (motion detection), alarm, M&A, IVS and POS, enable
the channel record function when corresponding alarm occurs. For example, when the
alarm type is MD, select
Main Menu
>
ALARM
>
Video Detection
>
Motion
Detection
, select the record channel and enable record function.
●
When the record type is Motion (motion detection), alarm, M&A, IVS and POS, refer to
"4.8.5 Video Detection", "4.8.3 Alarm Input", "4.7.1.3 IVS" and "4.9 POS" for detailed
information.
Figure 4-31 Select record channel
Step 4 Set record period. It includes edit mode and draw mode. See Figure 4-34.