Dahua XVR5116HS User Manual

445
Please note the activation snapshot has the higher priority than schedule snapshot. If
you have enabled these two types at the same time, system can activate the activation
snapshot when an alarm occurs, and otherwise system just operates the schedule
snapshot.
4.9.4.1.2.4 Image FTP
In the main menu, from Setting->Storage->FTP, you can set FTP server information.
Please enable FTP function and then click save button. See Figure 4- 182.
Please boot up corresponding FTP server.
Please enable schedule snapshot (Chapter 4.9.4.1.2.1) or activation snapshot
(Chapter 4.9.4.1.2.2) first, now system can upload the image file to the FTP server.
Figure 4- 182
4.9.4.2 HDD Manager
Here is for you to view and implement hard disk management. See Figure 4- 183.
You can see current HDD type, status, capacity and etc. The operation includes format
HDD, and change HDD property (read and write/read-only/redundancy).
Please input the
corresponding information
here, if you just upload the
image FTP.

Dahua XVR5116HS Specifications

General

USB Interface	2 USB 2.0 ports
Power Supply	DC 12V/2A
Video Output	1 HDMI, 1 VGA
Operating System	Embedded Linux
Video Compression	H.264+/H.264
Analog Camera Input	16 channel, BNC
IP Camera Input	Up to 16 channels
Audio In/Out	1/1, RCA
Display Resolution	1920 × 1080, 1280 × 1024, 1280 × 720
Network Interface	1 RJ-45 Port (10/100 Mbps)
HDD	1 SATA port, up to 6 TB
Dimensions	260 mm × 238 mm × 48 mm (W × D × H)
Smart Functions	SMD Plus
VGA Output	1920 × 1080, 1280 × 1024, 1280 × 720
Operating Temperature	-10°C to +55°C
Operating Humidity	10%–90% (RH), non-condensing