Dahua XVR5116HS User Manual

548
Figure 5- 77
5.10.3.2.1 Tripwire
System generates an alarm once there is any object crossing the tripwire in the specified
direction. Please use according to your actual situation.
Note
 The tripwire function is valid once your connected network camera or your DVR
supports this function.
 If you want to use the IVS function of the network camera, please make sure your
connected network camera supports this function.
Step 1 From main menu->Setup->Event->IVS->Tripwire, click to add the rule and
select the rule type as Tripwire.
Note
Double click to change a rule name.
Step 2 Check the Tripwire box to enable tripwire function. See Figure 5- 78.

Dahua XVR5116HS Specifications

General

USB Interface	2 USB 2.0 ports
Power Supply	DC 12V/2A
Video Output	1 HDMI, 1 VGA
Operating System	Embedded Linux
Video Compression	H.264+/H.264
Analog Camera Input	16 channel, BNC
IP Camera Input	Up to 16 channels
Audio In/Out	1/1, RCA
Display Resolution	1920 × 1080, 1280 × 1024, 1280 × 720
Network Interface	1 RJ-45 Port (10/100 Mbps)
HDD	1 SATA port, up to 6 TB
Dimensions	260 mm × 238 mm × 48 mm (W × D × H)
Smart Functions	SMD Plus
VGA Output	1920 × 1080, 1280 × 1024, 1280 × 720
Operating Temperature	-10°C to +55°C
Operating Humidity	10%–90% (RH), non-condensing