Daikin ACS320 - Technical Data; What this Chapter Contains

TeCHnICal daTa
What This Chapter Contains
The chapter contains the technical specications of the drive, eg ratings, sizes and technical requirements as well as
provisions for fullling the requirements for CE and other marks.
Table 73: Ratings, Types and Voltages
HP
Ratings
Frame Size
Input Output
Nominal without
Reactor A
Nominal with 5%
Reactor A
Continous @ 50C,
10% Overload
1
A
Continous @ 40C,
0% Overload A
Instantaneous
Peak
2
A
1-phase supply voltage 200 - 240 V units (Conrm output ratings meet motor requirements)
0.5 11.4 N/A 4.5 4.7 7.9 R1
1.0 16.1 N/A 6.5 6.7 11.4 R1
2.0 16.8 N/A 7.2 7.5 12.6 R2
3.0 21.0 N/A 9.4 9.8 16.5 R2
3-phase supply voltage 200 - 240 V units
0.5 8.4 5.2 4.7 5.2 8.2 R1
2.0 13.2 8.3 7.5 8.3 13.1 R1
3.0 15.7 10.8 9.8 10.8 17.2 R2
5.0 27.3 19.4 17.6 19.4 30.8 R2
7.5 45.0 26.8 24.4 26.8 42.7 R3
10.0 55.0 34.1 31.0 34.1 54.3 R4
15.0 76.0 50.8 46.2 50.8 80.9 R4
3-phase supply voltage 380 - 480 V units
0.5 2.2 1.2 1.1 1.2 2.1 R0
1.0 4.1 2.4 2.2 2.4 4.2 R1
2.0 6.9 4.1 3.7 4.1 7.2 R1
3.0 9.6 5.6 5.1 5.6 9.8 R1
4.0 11.6 7.3 6.6 7.3 12.8 R1
5.0 13.6 8.8 8.0 8.8 15.4 R1
7.5 18.8 12.5 11.4 12.5 21.9 R3
10.0 22.1 15.6 14.2 15.6 27.3 R3
15.0 30.9 23.1 21.0 23.1 40.4 R3
20.0 52.0 31.0 28.2 31.0 54.3 R4
25.0 61.0 38.0 34.5 38.0 66.5 R4
30.0 67.0 44.0 40.0 44.0 77.0 R4
1) Overloadability for one minute every ten minutes.
2) Instantaneous peak current for two seconds every ten minutes.
OM 1190-1 • MD4 VFD 102 www.DaikinApplied.com
TeCHnICal daTa