Need help?Do you have a question about the Daikin ACS320 and is the answer not in the manual?
General| Brand | Daikin |
|---|---|
| Model | ACS320 |
| Category | Controller |
| Language | English |
Explains warning symbols and cautions about conditions leading to injury or damage.
Warnings for those working on the drive, motor cable, or motor.
DANGER warning about physical injury or death from electrical hazards.
Explains benefiting from MD4 features and fine-tuning parameter values.
Details how to handle and adjust based on detected faults and alarms.
Provides step-by-step guide for changing parameters individually.
Explains the Auto/Hand control, Start/Stop, and Reference modification.
Step-by-step guide for changing parameters individually.
Explains how to view drive fault history, fault state details, and get help for faults.
Explains exporting/importing parameters between drives and control panels.
Restores the full parameter set from the Control Panel to the drive.
Copies a partial parameter set from the Control Panel to a drive.
Details the drive's two programmable analog voltage/current inputs.
Describes the single programmable current output (0-20mA).
Explains the five programmable digital inputs, including DI5 as frequency input.
Describes the single programmable relay output and optional extensions.
Details DI5 programmed as a frequency input for external reference.
Describes user-selectable ramps for acceleration/deceleration and their shapes.
Explains defining and selecting seven positive constant speeds.
Covers functions like AI<Min, Panel Loss, and External Fault.
Explains drive protection against motor stall conditions and reaction settings.
Describes detection of earth faults in motor or motor cable during start.
Lists common drive faults like Overcurrent, DC Overvoltage, etc.
Details adjustable limits for output frequency, current, and DC voltage.
Explains power limitation to protect drive components from overload.
Describes drive's ability to automatically reset after certain faults.
Explains drive monitoring of user-defined variables and outputting supervision status.
Describes preventing parameter adjustment via parameter lock.
Stores recent fault history, including fault codes and time stamps.
Defines external sources for start, stop, and direction commands.
Defines how the drive selects between command sources and REF1/REF2 characteristics.
Defines a set of constant speeds for programming up to 7 speeds.
Defines limits and filtering for analog inputs.
Defines drive's analog output signals and their scaling.
Defines system-level locks, resets, and enables for various functions.
Defines minimum and maximum limits for motor driving parameters.
Defines how the motor starts and stops, supporting several modes.
Defines ramps for acceleration and deceleration rates.
Provides controls for fine-tuning motor control parameters.
Defines fault situations and drive responses.
Defines conditions for automatic resets after faults.
Defines detection and reporting for motor overheating.
Defines parameters for the Process PID (PID1) controller.
Defines parameters for the second PID controller (PID2).
Installation guidelines for embedded fieldbus connections.
Guides activating serial communication and configuring EFB parameters.
Details selecting the serial communication protocol via parameter 9802.
Explains setting 9802 and its effect on other parameters.
Reminder about qualified electricians and safety instructions.
Describes issues and checks for incorrect wiring connections.
To Next Page