32
J. If no button is operated for 1 minute or the SCHED-
ULE button (1) is pressed once, the display returns
to the ALL screen when the setting was made in
the ALL screen, or to the INDIVIDUALLY screen
when the setting was made in the INDIVIDUALLY
screen.
If the set time is ahead of the current time, the
Schedule setting screen appears.
[Screen Display: Timer OFF Setting]
A. While the ALL or INDIVIDUALLY screen is dis-
played, press the SCHEDULE button (1) once.
B. The Schedule setting screen appears.
If no button is operated for 2 seconds while the dis-
play shows screen B on page 32 to screen F on
page 32, a guidance message, “ BUTTONS:
SELECT TIMER No., BUTTONS: SELECT
DAY OF THE WEEK, SET/CANCEL BUTTON:
SET,” appears and scrolls in the operation mode
display section (dot matrix).
C. Using the ALL button (3) or one of the individual
group selection buttons (4) (1 - 16), select the air
conditioner (group) to be set.
* If the timer is set in the ALL screen, the setting
will apply to all air conditioners (groups).
D. Using the or button (2), select TIMER OFF
and a Timer No. (7).
E. Using the or button (5), select the day of the
week to set.
J
A
B
C
D
TIMER 1 ON
TIMER 1 OFF
TIMER 4 ONTIMER 4 OFF
·····
E
SUN MON TUE WED THU FRI SAT
F
01_EN_3P124623-10N.fm Page 32 Monday, January 28, 2008 4:58 PM
To Next Page
Loading...
