Need help?Do you have a question about the Daikin DCS303A51 and is the answer not in the manual?
General| Model | DCS303A51 |
|---|---|
| Type | Remote Control |
| Display | LCD |
| Power Supply | Battery |
| Battery Type | AAA |
| Battery Quantity | 2 |
| Compatibility | Daikin HVAC Systems |
| Operating Range | Approx. 7 meters |
| Functions | Temperature control, mode selection, fan speed, timer |
| Features | Backlit display, child lock, energy saving mode |
Discusses general safety precautions for using the air conditioner and remote controller.
Explains the system's capability to monitor and control multiple indoor units.
Details the purpose and function of each button and display element on the remote controller.
Provides instructions on how to view the main screen showing all connected air conditioners.
Explains how to select and view the screen for a specific air conditioner or group.
Step-by-step guide to turn on all connected air conditioners simultaneously.
Instructions for turning off all connected air conditioners simultaneously.
Procedure to turn on a single selected air conditioner or group.
Procedure to turn off a single selected air conditioner or group.
Steps to change the operating mode (Fan, Cool, Heat) for all units at once.
How to change the operating mode for an individual unit or group.
Guide to adjust the set temperature for all units simultaneously.
Instructions for adjusting the set temperature for individual units or groups.
Explains how to set operation codes for controlling remote control access and priority.
Procedure to reset the filter indicator light after cleaning the filter.
How to enable/disable and view the outdoor temperature on the display.
How to enable or disable the daylight saving time function.
How to adjust the contrast level of the remote controller's LCD screen.
How to lock the remote controller's buttons to prevent accidental operation.
Detailed steps for setting daily ON/OFF timers for the air conditioner.
How to reset a programmed timer setting to its default blank state.
Guide to set the correct date, day of the week, and time on the remote controller.
Instructions to enter standby mode, turning off the display and activating energy saving.
Explains how the controller diagnoses and displays errors from the air conditioner.
How to set which unit controls the cooling/heating mode when multiple units are connected.
To Next Page
