15
NOTE)When remote controllers are not used, do not select “Remote Controller Permit Timer.”
Selecting this setting disallows the use of the timer for air conditioner operation.
RESET FILTER SIGN
Turning off the Filter sign
[CLEAN Signs]
When the filter or element needs cleaning, the Filter or
Element sign appears on the multi-language central
remote controller.
(* For details, refer to “CLEAN SIGN” on page 5.)
After cleaning the filter, reset the Filter sign by using
RESET FILTER SIGN in the Function Menu.
[Operating Procedure]
1. While the ALL or INDIVIDUALLY screen is dis-
played, press the FUNCTION button (1) once.
2. The Function Menu appears.
The Function Menu changes as follows when the
or button (2) is pressed.
3.
In the Reset Filter Sign screen, select the air condi-
tioner for which the filter sign is to be reset by using
one of the individual group selection buttons (3).
4. Press the SET/CANCEL button
(4)
to reset the Fil-
ter sign.
Control mode
Operation performed from remote controller
Operation
Code
ON
OFF
Temperature
setting
Operation
mode setting
All ON by central
remote controller,
individual ON, ON by
timer
All OFF by central
remote controller,
individual OFF, OFF
by timer
Prohibit Remote
Controller
Prohibit
(Examples)
Prohibit
(Examples)
Prohibit
(Examples)
Prohibit
Permit 0
Prohibit 10
Permit
(Examples)
Permit
(Examples)
1 (Examples)
Prohibit 11
Permit Only
OFF from
Remote
Controller
Permit
Prohibit
Permit 2
Prohibit 12
Permit
Permit 3
Prohibit 13
Central Control
Priority
Permit
Prohibit
Permit 4
Prohibit 14
Permit
Permit 5
Prohibit 15
Last Button
Priority
Permit
Prohibit
Permit 6
Prohibit 16
Permit
Permit 7
Prohibit 17
Remote
Controller
Permit Timer
Permit
(When timer ON)
Prohibit
(When timer OFF)
Permit
Prohibit
Permit 8
Prohibit 18
Permit
Permit 9
Prohibit 19
(1)
(2)
(4)
(3)
OPERATION
CODE
RESET
FILTER SIGN
OUTDOOR
TEMP
DISPLAY
DAYLIGHT
SAVING
SET DAYLIGHT
SAVING TIME
CONTRAST
KEY
LOCK
01_EN_3P124623-10N.fm Page 15 Monday, January 28, 2008 4:58 PM
To Next Page
Loading...
