EasyManua.ls Logo

Daikin DCS303A51 - Page 35

Daikin DCS303A51
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
8.
If no button is operated for 1 minute or the SCHED-
ULE button (1) is pressed, the display returns to the
ALL screen when the setting was made in the ALL
screen, or to the INDIVIDUALLY screen when the
setting was made in the INDIVIDUALLY screen.
< “OFF DAY” SETTING Cancellation >
9. To cancel the “OFF DAY” SETTING, press the
SCHEDULE button (1) once while the ALL screen
or INDIVIDUALLY screen is displayed. The display
returns to the Schedule setting screen.
10. Press the or button (4) to select the day of the
week for the cancellation of the “OFF DAY” SET-
TING.
11.
Hold the SET/CANCEL button (5) pressed for more
than 4 seconds to cancel the “OFF DAY” SETTING.
* Schedule setting cannot be made unless the
“OFF DAY” SETTING is cancelled.
NOTE
1. Operate buttons while the backlights are lit.
2. In each of steps 2 through 6, if no button is operated
for 1 minute, the display returns to the ALL screen
when the setting was made in the ALL screen, or to
the INDIVIDUALLY screen when the setting was
made in the INDIVIDUALLY screen.
In the above-mentioned case, the setting being
entered will not be applied.
[Screen Display: “OFF DAY” SETTING]
A. While the ALL or INDIVIDUALLY screen is dis-
played, press the SCHEDULE button (1) once.
B. The Schedule setting screen appears.
If no button is operated for 2 seconds while the dis-
play shows screen B on page 34 to screen F on
page 34, a guidance message, “ BUTTONS:
SELECT TIMER No., BUTTONS: SELECT
DAY OF THE WEEK, SET/CANCEL BUTTON:
SET,” appears and scrolls in the operation mode
display section (dot matrix).
C. Using the ALL button (2) or one of the individual
group selection buttons (3) (1 - 16), select the air
conditioner (group) to be set.
D. Press the or button (4) to set the day of the
week for “OFF DAY” SETTING.
E. Press the SET/CANCEL button (5) once to apply
the setting.
The Timer No. and “day of the week” indications
change from blinking to constant On, and the set
time indication blinks.
When the SET/CANCEL button (5) is pressed
once again, the display returns to screen B (blink-
ing Timer No. (7) and “day of the week” indications)
shown on page 34.
F. Using the or button (6), select “OFF DAY”
SETTING.
A
B
C
D
E
F
TIMER SETTING
OFF DAY
COPY PREV DAY’S SETTINGCLEAR TIMER
01_EN_3P124623-10N.fm Page 34 Monday, January 28, 2008 4:58 PM

Related product manuals