Dalsa Xtium-CLHS PX8 - Host System Requirements; Table 20: Environment Specifications; Table 21: Power Specifications

60
•
Technical Specifications Xtium-CLHS PX8 User's Manual
Host System Requirements
Xtium-CLHS PX8 Dimensions
Approximately 4 in. (10 cm) wide by 4 in. (10 cm) high
General System Requirements for the Xtium-CLHS PX8
• PCI Express Gen2 x8 slot compatible;
(will work in Gen1 x8 slot with reduced bandwidth to host)
• On some computers the Xtium-CLHS PX8 may function installed in a x16 slot. The computer
documentation or direct testing by the user is required.
• Xtium-CLHS PX8 operates correctly when installed in a multi-processor system (including
Hyper-Threading multi-core processors).
Operating System Support
Windows 7, Windows 8 and Windows 10, each in either 32-bit or 64-bit
Environment
Ambient Temperature: 10° to 50°C (operation)
-40° to 75°C (storage)
Relative Humidity: 5% to 90% non-condensing (operating)
0% to 95% (storage)
MTBF @40°C 36.4 years
Table 20: Environment Specifications
Note: Ensure adequate airflow for proper functioning of the board across the entire temperature
range of 10 – 50°C . We recommend airflow measuring 80 LFM (linear feet per minute) across the
surface of the board.
Power Requirements while grabbing
+
3.3V: 0.133A
+12V:
0.133A
Table 21: Power Specifications