Need help?Do you have a question about the Dalsa Xtium2-CLHS PX8 and is the answer not in the manual?
General| Interface | Camera Link HS |
|---|---|
| Camera Link HS Support | Yes |
| PoCL | No |
| Number of Ports | 1 |
| Operating System Support | Windows, Linux |
| Form Factor | PCIe |
| Compatibility | GenICam |
| Host Interface | PCI Express |
Lists part numbers for Xtium2-CLHS PX8 board and software.
Introduces the Xtium2-CLHS PX8 frame grabber and its key features.
Describes ACUPlus, DTE, PCIe interface, and advanced controls.
Overview of Sapera++ LT and Sapera Processing libraries for image acquisition and analysis.
Step-by-step guide for installing the board, SDK, and drivers.
Procedures for firmware update and verifying installation with CamExpert.
How to modify board/camera parameters and save configuration files.
Detailed steps for installing the board hardware and software.
Using the firmware loader for automatic and manual updates.
Steps for upgrading Sapera LT and/or board drivers.
Using Device Manager to view board details and generate reports.
Viewing Sapera servers and configuring contiguous memory for resources.
Guide to connecting and configuring CLHS cameras using CamExpert.
Description of CamExpert UI elements, parameter groups, and configuration files.
How to use CamExpert with the Xtium-CLHS PX8, including acquisition servers.
Detailed descriptions of parameters in the Basic Timing category.
Detailed descriptions of parameters in the Advanced Control category.
Detailed descriptions of parameters in the External Trigger category.
Detailed descriptions of parameters for image buffer and ROI settings.
Block and flow diagrams illustrating the board's architecture and processing.
Details on Camera Link HS interface, line triggers, and shaft encoders.
Synchronization signals, acquisition methods, and trigger reliability.
Lists supported parameters, including camera, VIC, ACQ, and transfer-related settings.
Theory of operation for metadata and flat field correction.
Table defining supported output LUTs for the Xtium2-CLHS PX8.
Detailed specifications of the board's hardware features and performance.
Requirements for the host computer system, OS, and environment.
Listing of electromagnetic interference certifications for the board.
Diagrams and descriptions of board connectors, LEDs, and switches.
Setup for data forwarding and connecting dual output cameras.
Detailed descriptions of the board's status LEDs.
Specifications for general inputs/outputs, triggers, encoders, and cables.
Information on specific cables and connector kits available.
General overview of the Camera Link HS standard and its features.
Guide to performing silent installations of drivers and software using response files.
First steps for troubleshooting, including checking LEDs and PCI conflicts.
Overview and usage of the diagnostic tool for board status and monitoring.
Solutions for common problems like BSOD, driver errors, and firmware update failures.
Troubleshooting specific symptoms like no grab, black image, or low bandwidth.
Contact details for sales inquiries and technical support assistance.
To Next Page
