Dalsa Xtium2-CLHS PX8 User Manual

Xtium2-CLHS PX8 User's Manual Quick Start Setup & Installation • 11
To complete the installation, update the Xtium2-CLHS PX8 firmware when prompted; select
Automatic to update the firmware (only one firmware option is available, support for one
Camera Link HS camera).
Reboot when all software and board drivers are installed.
Launch Sapera LT CamExpert
to verify the installation; the board should be present in
the list of available devices.
Connect camera to the board Camera Link HS input connector. Ensure camera is
properly powered.

Dalsa Xtium2-CLHS PX8 Specifications

General

Brand	Dalsa
Model	Xtium2-CLHS PX8
Category	Media Converter
Language	English