10 • Quick Start Setup & Installation Xtium2-CLHS PX8 User's Manual
Quick Start Setup & Installation
The following procedure outlines the basic steps required to install the Teledyne DALSA Xtium2-
CLHS PX8. For complete installation details and information, see Installing Xtium2-CLHS PX8.
Install the Xtium2-CLHS PX8 in an available PCIe x8 slot on the host computer.
Download and install the Sapera LT SDK software from the Teledyne DALSA website.
http://teledynedalsa.com/imaging/support/downloads/sdks/
Download and install the Xtium2-CLHS PX8 device driver from the Teledyne DALSA website.
https://www.teledynedalsa.com/imaging/support/downloads/drivers/
To Next Page
Loading...